PT Super Surya Indonesia LTC GLODOK
Showing 191–200 of 224 results
-
Add to cart
Digunakan untuk merubah tegangan 220V AC menjadi 12V DC. Beberapa contoh barang yang menggunakan 12V DC : Lampu LED, LED Module, Strip LED, CCTV, Lampu Halogen dan sebagainya
FULL LOAD (100% Murni penggunaan Watt)
Fakta parameters :
1. Input Voltage : 170 – 250 V AC
2. Input Current : 230V: 0.36A Max.
3. 100% Load test
4. Output Voltage accurate and stable (output over voltage, over current and short circuit protection)
5. Output low ripple and noise
6. MTBF : 50,000 Hours
7. Input Frequency : 50/60 Hz
8. Input Surge : Cold start /230 V AC
9. Dimension : 232 mm (Length) x 37 mm (Width) x 21 mm (Height)
10. Cooling method : Natural Cooling air convection
11. Net weight : 450 gram
12. Ripple Noise : 100 mV
13. Efficiency : 85%
14. 1 Year Warranty
15. IP67
16. Output : DC 12V / 3.33A (MURNI)
17. Rated Power : 40 Watt (MURNI)
OUTPUT SPECIFICATION :
Adjustable Voltage : +- 10%
Start up time : <1S (input 230V, Io = 100%)
Keep time : >20mS (input 230V, Io=100%)
Voltage regulation : (Full load) < 0.5%
PROTECTION FUNCTION :
Overload protection : Active, 110%- 120% rated power, automatic recovery, Output voltage drops if overloaded
Over-Voltage protection : 105% – 150% of the rated voltage
Short Circuit : Hiccup mode, recovers automatically after fault condition is removed
SAFETY STANDARDS :
According with EN 61347-2-13 Standards
Withstand voltage : I/P-O/P: 3750 VAC/1min/<5mA
EMC STANDARDS :
According with GB9254, EN55022 Class A, EN61347-2-13:2008 Standards
ENVIRONMENTAL :
Working Temperature : -20 ~ 60 C / 20% ~ 90% RH (no frost)
Storage Temperature : 40 ~ 85 C / 10% ~ 95% (no frost)
Height above sea level < 2000 Meters -
Add to cart
Digunakan untuk merubah tegangan 220V AC menjadi 12V DC. Beberapa contoh barang yang menggunakan 12V DC : Lampu LED, LED Module, Strip LED, CCTV, Lampu Halogen dan sebagainya
FULL LOAD (100% Murni penggunaan Watt)
Fakta parameters :
1. Input Voltage : 170 – 250 V AC
2. Input Current : 230V: 0.48A Max.
3. 100% Load test
4. Output Voltage accurate and stable (output over voltage, over current and short circuit protection)
5. Output low ripple and noise
6. MTBF : 50,000 Hours
7. Input Frequency : 50/60 Hz
8. Input Surge : Cold start /230 V AC
9. Dimension : 195 mm (Length) x 52 mm (Width) x 35 mm (Height)
10. Cooling method : Natural Cooling air convection
11. Net weight : 800 gram
12. Ripple Noise : 100 mV
13. Efficiency : 85%
14. 1 Year Warranty
15. Output : DC 12V / 5A (MURNI)
16. Rated Power : 60 Watt (MURNI)
OUTPUT SPECIFICATION :
Adjustable Voltage : +- 10%
Start up time : 1S (input 230V, Io = 100%)
Keep time : 20mS (input 230V, Io=100%)
Voltage regulation : (Full load) < 0.5%
PROTECTION FUNCTION :
Overload protection : Active, 110%- 120% rated power, automatic recovery, Output voltage drops if overloaded
Over-Voltage protection : 105% – 150% of the rated voltage
Short Circuit : Hiccup mode, recovers automatically after fault condition is removed
SAFETY STANDARDS :
According with EN 61347-2-13 Standards
Withstand voltage : I/P-O/P: 3750 VAC/1min/ 5mA
EMC STANDARDS :
According with GB9254, EN55022 Class A, EN61347-2-13:2008 Standards
ENVIRONMENTAL :
Working Temperature : -20 ~ 60 C / 20% ~ 90% RH (no frost)
Storage Temperature : 40 ~ 85 C / 10% ~ 95% (no frost)
Height above sea level < 2000 Meters -
Add to cart
Digunakan untuk merubah tegangan 220V AC menjadi 12V DC. Beberapa contoh barang yang menggunakan 12V DC : Lampu LED, LED Module, Strip LED, CCTV, Lampu Halogen dan sebagainya
FULL LOAD (100% Murni penggunaan Watt)
Fakta parameters :
1. Input Voltage : 170 – 250 V AC
2. Input Current : 230V: 0.36A Max.
3. 100% Load test
4. Output Voltage accurate and stable (output over voltage, over current and short circuit protection)
5. Output low ripple and noise
6. MTBF : 50,000 Hours
7. Input Frequency : 50/60 Hz
8. Input Surge : Cold start /230 V AC
9. Dimension : 204 mm (Length) x 52 mm (Width) x 35 mm (Height)
10. Cooling method : Natural Cooling air convection
11. Net weight : 1000 gram
12. Ripple Noise : 100 mV
13. Efficiency : 85%
14. 1 Year Warranty
15. IP67
16. Output : DC 12V / 8.33A (MURNI)
17. Rated Power : 100 Watt (MURNI)
OUTPUT SPECIFICATION :
Adjustable Voltage : +- 10%
Start up time : <1S (input 230V, Io = 100%)
Keep time : >20mS (input 230V, Io=100%)
Voltage regulation : (Full load) < 0.5%
PROTECTION FUNCTION :
Overload protection : Active, 110%- 120% rated power, automatic recovery, Output voltage drops if overloaded
Over-Voltage protection : 105% – 150% of the rated voltage
Short Circuit : Hiccup mode, recovers automatically after fault condition is removed
SAFETY STANDARDS :
According with EN 61347-2-13 Standards
Withstand voltage : I/P-O/P: 3750 VAC/1min/<5mA
EMC STANDARDS :
According with GB9254, EN55022 Class A, EN61347-2-13:2008 Standards
ENVIRONMENTAL :
Working Temperature : -20 ~ 60 C / 20% ~ 90% RH (no frost)
Storage Temperature : 40 ~ 85 C / 10% ~ 95% (no frost)
Height above sea level < 2000 Meters -
Add to cart
Digunakan untuk merubah tegangan 220V AC menjadi 24V DC. Beberapa contoh barang yang menggunakan 24V DC : Lampu LED, LED Module, Strip LED, Lampu Truck, Lampu Bis dan sebagainya
FULL LOAD (100% Murni penggunaan Watt)
Fakta parameters :
Input Voltage : 170 – 250 V AC
Input Current : 230V: 0.19A Max.
100% Load test
Output Voltage accurate and stable (output over voltage, over current and short circuit protection)
Output low ripple and noise
MTBF : 50,000 Hours
Input Frequency : 50/60 Hz
Input Surge : Cold start /230 V AC
Dimension : 160 mm (Length) x 27 mm (Width) x 20 mm (Height)
Cooling method : Natural Cooling air convection
Net weight : 155 gram
Ripple Noise : 100 mV
Efficiency : 83%
1 Year Warranty
Output : DC 24V / 0.83A (MURNI)
Rated Power : 20 Watt (MURNI)
Isi 1 Carton : 100 Pcs
Ukuran 1 Carton : 35 cm * 25 cm * 18 cm
Berat 1 Carton : 20 Kg
OUTPUT SPECIFICATION :
Adjustable Voltage : +- 10%
Start up time : <1S (input 230V, Io = 100%)
Keep time : >20mS (input 230V, Io=100%)
Voltage regulation : (Full load) < 0.5%
PROTECTION FUNCTION :
Overload protection : Active, 110%- 120% rated power, automatic recovery, Output voltage drops if overloaded
Over-Voltage protection : 105% – 150% of the rated voltage
Short Circuit : Hiccup mode, recovers automatically after fault condition is removed
SAFETY STANDARDS :
According with EN 61347-2-13 Standards
Withstand voltage : I/P-O/P: 3750 VAC/1min/<5mA
EMC STANDARDS :
According with GB9254, EN55022 Class A, EN61347-2-13:2008 Standards
ENVIRONMENTAL :
Working Temperature : -20 ~ 60 C / 20% ~ 90% RH (no frost)
Storage Temperature : 40 ~ 85 C / 10% ~ 95% (no frost)
Height above sea level < 2000 Meters -
Add to cartDigunakan untuk merubah tegangan 220V AC menjadi 12V DC. Beberapa contoh barang yang menggunakan 12V DC : Lampu LED, LED Module, Strip LED, CCTV, Lampu Halogen dan sebagainya
Fakta parameters :
1. Input Voltage : 110 V +15% AC / AC 220 V +- 15% change by switch
2. Built – in EMI Filter
3. 100% Load test
4. Output Voltage accurate and stable (output over voltage, over current and short circuit protection)
5. Output low ripple and noise
6. MTBF : 50,000 Hours
7. Input Frequency : 50 / 60 Hz
8. Input Surge : Cold start :/230 V AC
9. Dimension : 200 mm (Length) x 110 mm (Width) x 50 mm (Height)
10. Cooling method : Natural Cooling air convection
11. Net weight : 556 gram
12. Ripple Noise : 100 mV
13. Efficiency : 80%
14. Garansi 1 Tahun ( Tidak berlaku jika, salah instalasi seperti konslet, voltase dinaikkan atau di turunkan, kemasukkan air karna diperuntukkan indoor dan di modifikasi )
OUTPUT SPECIFICATION :
Adjustable Voltage : +- 10%
Start up time : 1S (input 230V, Io = 100%)
Keep time : 20mS (input 230V, Io=100%)
Voltage regulation : (Full load) < 0.5%
PROTECTION FUNCTION :
Overload protection : 105%- 150% rated power, automatic recovery
Over-Voltage protection : 105% – 150% of the rated voltage
INSULATION INTENSITY :
Input – output : 1500 VAC/1 min
Input – ground : 1500 VAC/1 min
Input – ground : 500 VAC/1 min
SAFETY STANDARDS :
According with GB4943, UL60950-1, EN60950-1 Standards
EMC STANDARDS :
According with GB9254, EN55022 Class A, EN61347-2-13:2008 Standards
ENVIRONMENTAL :
Working Temperature : -20 ~ 60 C / 20% ~ 90% RH (no frost)
Storage Temperature : 40 ~ 85 C / 10% ~ 95% (no frost)
Height above sea level < 2000 Meters -
Add to cartDigunakan untuk merubah tegangan 220V AC menjadi 24V DC. Beberapa contoh barang yang menggunakan 24V DC : Lampu LED, LED Module, Strip LED, Radio, Menara Telekomunikasi, Lampu PJU LED dan sebagainya
Fakta parameters :
1. Input Voltage : 110 V +15% AC / AC 220 V +- 15% change by switch
2. Built – in EMI Filter
3. 100% Load test
4. Output Voltage accurate and stable (output over voltage, over current and short circuit protection)
5. Output low ripple and noise
6. MTBF : 50,000 Hours
7. Input Frequency : 50 / 60 Hz
8. Input Surge : Cold start :/230 V AC
9. Dimension : 200 mm (Length) x 110 mm (Width) x 50 mm (Height)
10. Cooling method : Active Fan Cooling Temperature
11. Net weight : 705 gram
12. Ripple Noise : 100 mV
13. Efficiency : 82%
14. Garansi 1 Tahun ( Tidak berlaku jika, salah instalasi seperti konslet, voltase dinaikkan atau di turunkan, kemasukkan air karna diperuntukkan indoor dan di modifikasi )
OUTPUT SPECIFICATION :
Adjustable Voltage : +- 10%
Start up time : 1S (input 230V, Io = 100%)
Keep time : 20mS (input 230V, Io=100%)
Voltage regulation : (Full load) < 0.5%
PROTECTION FUNCTION :
Overload protection : 105%- 150% rated power, automatic recovery
Over-Voltage protection : 105% – 150% of the rated voltage
INSULATION INTENSITY :
Input – output : 1500 VAC/1 min
Input – ground : 1500 VAC/1 min
Input – ground : 500 VAC/1 min
SAFETY STANDARDS :
According with GB4943, UL60950-1, EN60950-1 Standards
EMC STANDARDS :
According with GB9254, EN55022 Class A, EN61347-2-13:2008 Standards
ENVIRONMENTAL :
Working Temperature : -20 ~ 60 C / 20% ~ 90% RH (no frost)
Storage Temperature : 40 ~ 85 C / 10% ~ 95% (no frost)
Height above sea level < 2000 Meters -
Add to cartDigunakan untuk : Neon Box, Sign letter, Drop ceiling dan lain – lain.
Memerlukan Power Supply untuk digunakan.
Fakta Teknis :
Forward Voltage : DC 12 V (Non Polarity)
Forward Current : 40 mA
Power Consumption : 0.48 W
Size (mm) : 41 (Panjang) * 12 (Lebar) * 7.5 (tinggi) mm
Brightness per 1 LED : 12,000 mcd (37.7 Lux dari 1 meter)
Brightness continuance : Didesain untuk meminimalisasi kerusakan chips dari listrik statis , Constant Voltage untuk menjaga cahaya tetap terang at all times
Color : White (9,000K) ; Cx 0.2797 Cy 0.2810
Panjang kabel per module : 7 cm
IP68 (Water proof)
Lifetime : Lebih dari 50,000 Jam
A Class LED Chips (made in Korea)
Beam angle : 120 derajat
CRI > 75 Ra
Net weight : 6 gram
SMD LED mounted
SS Light Double tape di belakang LED Module sehingga mudah digunakan
Cable : #18 (2.1 * 4.5 * 2C)
Base Material : ASB (LG-HF380, White)
Operating temperature : -30 ~ 60 C
Installasi :
Jumlah maksimal module untuk direct connection ke Power Supply : 100 Pcs
Semua modules harus di pasang dalam jarak kurang dari 10 meter dari Power Supply
Rekomendasi ketebalan kabel : 1 SQ (~1 mm) per 100 pcs LED Modules 3 chips
Rekomendasi penggunaan Power Supply : 70% dari kapasitas full
Tentang SS Light
SS Light adalah perusahaan manufaktur LED Module terbaik di Korea yang berdiri pada Januari 2004. Dengan market share lebih dari 50% di Korea Selatan, menjadikan lebih dari separuh gedung di Korea Selatan menggunakan SS Light LED Module.
SS Light merupakan Perusahaan pertama yang membuat kontrak resmi dengan Samsung Electronic untuk mensupply LED 3 chips. Kemudian perusahaan pertama juga yang mendapatkan sertifikasi IP68 (Water proof) utk LED module.
Memiliki 16 Certification yang menjamin bahwa Produk SS Light berkualitas -
Add to cartDigunakan untuk : Neon Box, Sign letter, Drop ceiling dan lain – lain.
Memerlukan Power Supply untuk digunakan.
Fakta Teknis :
Forward Voltage : DC 12 V (Non Polarity)
Forward Current : 60 mA
Power Consumption : 0.72 W
Size (mm) : 68 (Panjang) * 16 (Lebar) * 7.5 (tinggi) mm
Brightness per 1 LED : 3,300 mcd (10.4 Lux dari 1 meter)
Brightness continuance : Didesain untuk meminimalisasi kerusakan chips dari listrik statis , Constant Voltage untuk menjaga cahaya tetap terang at all times
Color : Blue
Panjang kabel per module : 9 cm
IP68 (Water proof)
Lifetime : Lebih dari 50,000 Jam
A Class LED Chips (made in Korea)
Beam angle : 120 derajat
CRI > 75 Ra
Net weight : 9 gram
SMD LED mounted
SS Light Double tape di belakang LED Module sehingga mudah digunakan
Cable : #18 (2.1 * 4.5 * 2C)
Base Material : ASB (LG-HF380, White)
Operating temperature : -30 ~ 60 C
Installasi :
Jumlah maksimal module untuk direct connection ke Power Supply : 50 Pcs
Semua modules harus di pasang dalam jarak kurang dari 10 meter dari Power Supply
Rekomendasi ketebalan kabel : 1 SQ (~1 mm) per 100 pcs LED Modules 3 chips
Rekomendasi penggunaan Power Supply : 70% dari kapasitas full
Tentang SS Light
SS Light adalah perusahaan manufaktur LED Module terbaik di Korea yang berdiri pada Januari 2004. Dengan market share lebih dari 50% di Korea Selatan, menjadikan lebih dari separuh gedung di Korea Selatan menggunakan SS Light LED Module.
SS Light merupakan Perusahaan pertama yang membuat kontrak resmi dengan Samsung Electronic untuk mensupply LED 3 chips. Kemudian perusahaan pertama juga yang mendapatkan sertifikasi IP68 (Water proof) utk LED module.
Memiliki 16 Certification yang menjamin bahwa Produk SS Light berkualitas tinggi -
Add to cartDigunakan untuk : Neon Box, Sign letter, Drop ceiling dan lain – lain.
Memerlukan Power Supply untuk digunakan.
Fakta Teknis :
Forward Voltage : DC 12 V (Non Polarity)
Forward Current : 60 mA
Power Consumption : 0.72 W
Size (mm) : 68 (Panjang) * 16 (Lebar) * 8 (tinggi) mm
Brightness per 1 LED : 18,000 mcd (56.5 Lux dari 1 meter)
Brightness continuance : Didesain untuk meminimalisasi kerusakan chips dari listrik statis , Constant Voltage untuk menjaga cahaya tetap terang at all times
Color : White (9,000K)
Panjang kabel per module : 9 cm
IP68 (Water proof)
Lifetime : Lebih dari 50,000 Jam
A Class LED Chips (made in Korea)
Beam angle : 115 derajat
CRI > 75 Ra
Net weight : 9 gram
SMD LED mounted
SS Light Double tape di belakang LED Module sehingga mudah digunakan
Cable : #18 (2.1 * 4.5 * 2C)
Base Material : ASB (LG-HF380, White)
Operating temperature : -30 ~ 60 C
Installasi :
Jumlah maksimal module untuk direct connection ke Power Supply : 50 Pcs
Semua modules harus di pasang dalam jarak kurang dari 10 meter dari Power Supply
Rekomendasi ketebalan kabel : 1 SQ (~1 mm) per 100 pcs LED Modules 3 chips
Rekomendasi penggunaan Power Supply : 70% dari kapasitas full
Tentang SS Light
SS Light adalah perusahaan manufaktur LED Module terbaik di Korea yang berdiri pada Januari 2004. Dengan market share lebih dari 50% di Korea Selatan, menjadikan lebih dari separuh gedung di Korea Selatan menggunakan SS Light LED Module.
SS Light merupakan Perusahaan pertama yang membuat kontrak resmi dengan Samsung Electronic untuk mensupply LED 3 chips. Kemudian perusahaan pertama juga yang mendapatkan sertifikasi IP68 (Water proof) utk LED module.
Memiliki 16 Certification yang menjamin bahwa Produk SS Light berkualitas tinggi dan -
Add to cartUsed for : Neon Box , Sign letter , Drop ceiling and others – others .
Requires Power Supply for use .
Technical facts :
Forward Voltage : DC 12 V ( Non Polarity )
Forward Current : 60 mA
Power Consumption : 0.72 W
Size ( mm ) : 68 ( length ) * 16 ( width ) * 7.5 ( height ) mm
Per 1 LED Brightness : 12,000 mcd ( 37.7 Lux of 1 meter )
Brightness continuance : Designed to minimize damage from static electricity chips , Constant Voltage light to keep it light at all times
Color : Green
Cable length per module : 9 cm
IP68 ( Water proof )
Lifetime : More than 50,000 Hours
A Class LED Chips (made in Korea )
Beam angle : 120 degrees
CRI > 75 Ra
Net weight : 9 grams
SMD LEDs mounted
SS Light Double-sided tape on the back so it is easy to use LED Module
Cable: # 18 ( 2.1 * 4.5 * 2C )
Base Material : ASB ( LG – HF380 , White )
Operating Temperature : -30 ~ 60 C
installation :
The maximum number of modules for direct connection to the Power Supply : 50 Pcs
All modules must be installed within a distance of less than 10 meters from the Power Supply
Recommended thickness of the cable : 1 SQ ( ~ 1 mm ) per 100 pcs LED Modules 3 chips
Recommended use Power Supply : 70 % of full capacity
About SS Light
SS LED Light Module is the best manufacturing company in Korea which was established in January 2004 . With a market share of over 50 % in South Korea , making more than half of the buildings in South Korea using the SS LED Light Module .
SS Light is the first company to make a formal contract with Samsung Electronics to supply LED chips 3 . Then also the first company certified with IP68 ( Water proof ) For the LED module .
Has 16 Certification which ensures that the products are of high quality SS Light and safe to use anywhere. Sample Certification : CE Certificate , Q – mark ( High Quality Assurance ) , KS Certificate , Certificate of Promising Export firm , GOST Certificate ( As SNI from Russia ) , UL Certificate ( certified unfit for
