PT Super Surya Indonesia LTC GLODOK
Showing 181–190 of 227 results
-
Add to cart
Digunakan untuk mengatur cahaya yang dihasilkan lampu. (Dapat diredupkan)
Fakta Teknis :
*) 300 Watt Maximum Dimmer
*) Input Voltage : 220 – 240 Volt
*) Dimensi : 8.5 cm x 8.5 cm x 3.5 cm
*) Berat Kotor : 100 Gram -
Add to cartAlat sensor untuk mengatur on / off Cahaya apabila terdeteksi gerakan manusia. Saat Alat Sensor ini mendeteksi dalam jarak 3.5 meter dari titik sensor ada gerakan, maka lampu akan otomatis menyala. Apabila Sensor tidak mendeteksi gerakan, maka lampu akan otomatis mati agar lebih hemat listik.
Cocok digunakan untuk : Koridor, Gudang, Teras rumah, tempat2 lain yang tidak sering memerlukan cahaya.
Keuntungan : Hemat Listrik
Technical Specs :
* Gross Weight : 300 Gram
* Net Weight : 200 Gram
* Rated Voltage : 230V ~ 10% , 50 / 60 Hz
* Load : Incandescent Lamp : Max. 2000 W ; AC Halogen Lamp : Max. 1000 W; LV Halogen Lamp : 1000VA; Fluorescent Lamp : Max 900 VA/100 uF; Energy Saving Lamp (Include CFL and PL) : Max. 80VA or 4 Lamps
* Auto Off time Adjustment : From 5 Secs to 30 Minutes, Test and 1 seconds
* Lux Adjustment : From 10 Lux to 2000 Lux (Tergantung lampu bisa didimmer atau tidak)
* Detection Range : 360 derajat Circular, Up to 7 Meter at height of 2.5 Meter (20-25 C)
* Operating Temperature : 0 C – 45 C (Indoor Usage) ; -20 C – 45 C (Outdoor Usage)
* IP 44 Class II
* Dimensions : 111.5 mm x 59 mm
Package Contents :
* 1 Pcs Sensor
* 1 Pcs User Manual
* 1 Pcs Protection Cap
* 4 Pcs Screw (Baut 3 x18 mm)
* 2 Pcs Wood Screw (Baut Kayu 4 x25.44 mm)
* 2 Pcs Screw (Baut 3 x 20 mm)
* 1 Pcs Junction Box
Features :
* Flexible
* Dapat mengatur Timer dan Lux (Dimmer)
* Sangat Sensitif terhadap gerakan
* Terdapat Indicator LED berwarna merah sebagai test operasional dan identifikasi yang jelas
Tata cara Installasi dan keamanan sudah ditulis lengkap dalam buku panduan (User Manual) -
Add to cart
Scoop Downlight LED 13 Watt.
Cocok digunakan untuk pencahayaan Display. Misal : Display harga Donuts atau kopi. Biasa lebih digunakan untuk display pricelist pajangan saat konsumen ingin memilih makanan/minuman di papan meja kasir.
Fakta Teknis :
1. Input Power : AC 100 – 240 Volt / 50-60 Hz
2. Power Consumption : 13 Watt
3. Power Factor : >0.9
4. IP20 – Indoor uses
5. Lifetime : 40,000 Jam
6. CRI : > 80
7. LED Chips : COB Sharp LED – LM80
8. Beam Angle : 60°
9. Bisa ditarik keluar sebesar 45° dari posisi diam (resting)
10. Size : 96 X 115 X 67 (mm) – 2.5 Inch
11. Cut Out Hole Size : 85-88 mm
12. 2 Tahun Garansi -
Add to cart
Tidak perlu Listrik PLN. Charge energy dari tenaga matahari.
Sudah termasuk tiang mini elbo dan baut untuk installasi.
Fakta Teknis :
* Battery 22000 maH
* Lumen : 2750 – 3250 LUMEN
* Run Time : > 19 Jam Full power Mode (12 Watt); >40 Jam Saving Power Mode (5 Watt)
* High Efficiency Polycrystalline silicon 40W
* Auto Turn ON at night and OFF in daytime
* Material : Die Casting Aluminum + Tempered Glass
* Dimensi : 420 X 200 X 30 (MM)
* Gross Weight : 2.1 Kilogram
* IP65
* CRI > 75
* 5,700 – 6,500K CCT (COOL WHITE)
* Power : 24 Watt
* Sensor Gerak Jangkauan 5-6 meter
* Chips : Epistar SMD 2835 48 LEDS -
Add to cart
Solar LED PJU All-in-one 8 Watt
Tidak perlu Listrik PLN. Charge energy dari tenaga matahari. Sudah termasuk baut untuk installasi.
Fakta Teknis :
* Lumen : 500 – 750 LUMEN
* Baterai 7000 mAH Lithium Battery
* Run Time : > 19 Jam Full power Mode (12 Watt); >40 Jam Saving Power Mode (5 Watt)
* High Efficiency Monocrystalline silicon 15W
* Auto Turn ON at night and OFF in daytime
* Material : Die Casting Aluminum + Tempered Glass
* Dimensi : 110 X 65 X 40 (MM)
* Gross Weight : 1 Kilogram
* IP65
* CRI > 75
* 5,700 6,500K CCT (COOL WHITE)
* Power : 8 Watt
* Sensor Gerak Jangkauan 5-6 meter
* Chips : Epistar SMD2835 24 LEDS -
Add to cartDigunakan untuk merubah tegangan 220V AC menjadi 12V DC. Beberapa contoh barang yang menggunakan 12V DC : Lampu LED, LED Module, Strip LED, CCTV, Lampu Halogen dan sebagainya
FULL LOAD (100% Murni penggunaan Watt)
Fakta parameters :
1. Input Voltage : 170 – 250 V AC
2. Built – in EMI Filter
3. 100% Load test
4. Output Voltage accurate and stable (output over voltage, over current and short circuit protection)
5. Output low ripple and noise
6. MTBF : 50,000 Hours
7. Input Frequency : 50/60 Hz
8. Input Surge : Cold start /230 V AC
9. Dimension : 85 mm (Length) x 58 mm (Width) x 38 mm (Height)
10. Cooling method : Natural Cooling air convection
11. Net weight : 500 gram
12. Ripple Noise : 100 mV
13. Efficiency : 84%
14. 1 Year Warranty
15. Output : DC 12V / 10A
OUTPUT SPECIFICATION :
Adjustable Voltage : +- 10%
Start up time : 1S (input 230V, Io = 100%)
Keep time : 20mS (input 230V, Io=100%)
Voltage regulation : (Full load) < 0.5%
PROTECTION FUNCTION :
Overload protection : 105%- 150% rated power, automatic recovery
Over-Voltage protection : 105% – 150% of the rated voltage
INSULATION INTENSITY :
Input – output : 1500 VAC/1 min
Input – ground : 1500 VAC/1 min
Input – ground : 500 VAC/1 min
SAFETY STANDARDS :
According with GB4943, UL60950-1, EN60950-1 Standards
EMC STANDARDS :
According with GB9254, EN55022 Class A, EN61347-2-13:2008 Standards
ENVIRONMENTAL :
Working Temperature : -20 ~ 60 C / 20% ~ 90% RH (no frost)
Storage Temperature : 40 ~ 85 C / 10% ~ 95% (no frost)
Height above sea level < 2000 Meters -
Add to cart
Digunakan untuk merubah tegangan 220V AC menjadi 12V DC. Beberapa contoh barang yang menggunakan 12V DC : Lampu LED, LED Module, Strip LED, CCTV, Lampu Halogen dan sebagainya
FULL LOAD (100% Murni penggunaan Watt)
Fakta parameters :
1. Input Voltage : 170 – 250 V AC
2. Built – in EMI Filter
3. 100% Load test
4. Output Voltage accurate and stable (output over voltage, over current and short circuit protection)
5. Output low ripple and noise
6. MTBF : 50,000 Hours
7. Input Frequency : 50/60 Hz
8. Input Surge : Cold start /230 V AC
9. Dimension : 199 mm (Length) x 98 mm (Width) x 42 mm (Height)
10. Cooling method : Natural Cooling air convection
11. Net weight : 700 gram
12. Ripple Noise : 100 mV
13. Efficiency : 84%
14. 1 Year Warranty
15. Output : DC 12V / 20A
OUTPUT SPECIFICATION :
Adjustable Voltage : +- 10%
Start up time : 1S (input 230V, Io = 100%)
Keep time : 20mS (input 230V, Io=100%)
Voltage regulation : (Full load) < 0.5%
PROTECTION FUNCTION :
Overload protection : 105%- 150% rated power, automatic recovery
Over-Voltage protection : 105% – 150% of the rated voltage
INSULATION INTENSITY :
Input – output : 1500 VAC/1 min
Input – ground : 1500 VAC/1 min
Input – ground : 500 VAC/1 min
SAFETY STANDARDS :
According with GB4943, UL60950-1, EN60950-1 Standards
EMC STANDARDS :
According with GB9254, EN55022 Class A, EN61347-2-13:2008 Standards
ENVIRONMENTAL :
Working Temperature : -20 ~ 60 C / 20% ~ 90% RH (no frost)
Storage Temperature : 40 ~ 85 C / 10% ~ 95% (no frost)
Height above sea level < 2000 Meters -
Add to cart
Digunakan untuk merubah tegangan 220V AC menjadi 12V DC. Beberapa contoh barang yang menggunakan 12V DC : Lampu LED, LED Module, Strip LED, CCTV, Lampu Halogen dan sebagainya
FULL LOAD (100% Murni penggunaan Watt)
Fakta parameters :
1. Input Voltage : 170 – 265 V AC
2. Built – in EMI Filter
3. 100% Full-Load test, 100% burn-in tested
4. Output Voltage accurate and stable (output over voltage, over current and short circuit protection)
5. Output low ripple and noise
6. MTBF : 50,000 Hours
7. Input Frequency : 50/60 Hz
8. Input Surge : Cold start /230 V AC / 1A. Max
9. Inrush Current : 40A
10. Dimension : 110 mm (Length) x 78 mm (Width) x 35 mm (Height)
11. Cooling method : Natural Cooling air convection
12. Net weight : 350 gram
13. Ripple Noise : 100 mV
14. Efficiency : 83%
15. IP55 (Tahan terhadap Hujan). Harus diinstallasi dengan rapi.
16. 1 Year Warranty
17. Output : DC 12V / 5A / 60 Watt (MURNI)
OUTPUT SPECIFICATION :
Adjustable Voltage : +- 10%
Start up time : 1S (input 230V, Io = 100%)
Keep time : 20mS (input 230V, Io=100%)
Voltage regulation : (Full load) < 0.5%
PROTECTION FUNCTION :
Active when loading is over 110%
Output Voltage drops if overloaded
Short circuit : Hiccup mode. Recovers automatically after fault condition is removed
Overload protection : 105%- 120% rated power, automatic recovery
Over-Voltage protection : 105% – 120% of the rated voltage
SAFETY STANDARDS :
According with EN 61347-2-13
ENVIRONMENTAL :
Working Temperature : -20 ~ 50 C / 20% ~ 90% RH (no frost)
Storage Temperature : -40 ~ 80 C / 10% ~ 95% (no frost)
Height above sea level < 2000 Meters
PERINGATAN :
1. Agar voltage output tidak turun, diusahakan pemasangan Power Supply dekat dengan sumber tenaga (listrik PLN).
2. Apabila harus jauh dari sumber tenaga, -
Add to cart
Digunakan untuk merubah tegangan 220V AC menjadi 12V DC. Beberapa contoh barang yang menggunakan 12V DC : Lampu LED, LED Module, Strip LED, CCTV, Lampu Halogen dan sebagainya
FULL LOAD (100% Murni penggunaan Watt)
Fakta parameters :
Input Voltage : 170 265 V AC
Built in EMI Filter
100% Full-Load test, 100% burn-in tested
Output Voltage accurate and stable (output over voltage, over current and short circuit protection)
Output low ripple and noise
MTBF : 50,000 Hours
Input Frequency : 50/60 Hz
Input Surge : Cold start /230 V AC / 1.6A. Max
Inrush Current : 40A
Dimension : 219 mm (Length) x 103 mm (Width) x 48 mm (Height)
Cooling method : Natural Cooling air convection
Net weight : 700 gram
Ripple Noise : 100 mV
Efficiency : 83%
IP55 (Tahan terhadap Hujan). Harus diinstallasi dengan rapi.
1 Year Warranty
Output : DC 12V / 10A / 120 Watt (MURNI)
OUTPUT SPECIFICATION :
Adjustable Voltage : +- 10%
Start up time : 1S (input 230V, Io = 100%)
Keep time : 20mS (input 230V, Io=100%)
Voltage regulation : (Full load) < 0.5%
PROTECTION FUNCTION :
Cut-off Mode, Output Shuts down if over-loaded
Recovers automatically after fault condition is removed
Overload protection : 105%- 150% rated power, automatic recovery
Over-Voltage protection : 105% 150% of the rated voltage
SAFETY STANDARDS :
According with EN 61347-2-13
ENVIRONMENTAL :
Working Temperature : -20 ~ 60 C / 20% ~ 90% RH (no frost)
Storage Temperature : 40 ~ 85 C / 10% ~ 95% (no frost)
Height above sea level < 2000 Meters
PERINGATAN :
Agar voltage output tidak turun, diusahakan pemasangan Power Supply dekat dengan sumber tenaga (listrik PLN).
Apabila harus jauh dari sumber tenaga, maka gunakan kabel yang lebih tebal dan penggunaan jangan 100% tenaga (Recommended 70% -
Add to cart
Digunakan untuk merubah tegangan 220V AC menjadi 12V DC. Beberapa contoh barang yang menggunakan 12V DC : Lampu LED, LED Module, Strip LED, CCTV, Lampu Halogen dan sebagainya
FULL LOAD (100% Murni penggunaan Watt)
Fakta parameters :
1. Input Voltage : 170 – 265 V AC
2. Built – in EMI Filter
3. 100% Full-Load test, 100% burn-in tested
4. Output Voltage accurate and stable (output over voltage, over current and short circuit protection)
5. Output low ripple and noise
6. MTBF : 50,000 Hours
7. Input Frequency : 50/60 Hz
8. Input Surge : Cold start /230 V AC / 1.6A. Max
9. Inrush Current : 40A
10. Dimension : 219 mm (Length) x 103 mm (Width) x 48 mm (Height)
11. Cooling method : Natural Cooling air convection
12. Net weight : 700 gram
13. Ripple Noise : 100 mV
14. Efficiency : 83%
15. IP55 (Tahan terhadap Hujan). Harus diinstallasi dengan rapi.
16. 1 Year Warranty
17. Output : DC 12V / 16.6A / 200 Watt (MURNI)
OUTPUT SPECIFICATION :
Adjustable Voltage : +- 10%
Start up time : 1S (input 230V, Io = 100%)
Keep time : 20mS (input 230V, Io=100%)
Voltage regulation : (Full load) < 0.5%
PROTECTION FUNCTION :
Cut-off Mode, Output Shuts down if over-loaded
Recovers automatically after fault condition is removed
Overload protection : 105%- 150% rated power, automatic recovery
Over-Voltage protection : 105% – 150% of the rated voltage
SAFETY STANDARDS :
According with EN 61347-2-13
PERINGATAN :
1. Agar voltage output tidak turun, diusahakan pemasangan Power Supply dekat dengan sumber tenaga (listrik PLN).
2. Apabila harus jauh dari sumber tenaga, maka gunakan kabel yang lebih tebal dan penggunaan jangan
3. STOCK sudah tertera. Untuk mempermudah transaksi, mohon untuk tidak tanya lagi.
Terima kasih
