SONIC Power Supply Indoor DC12V 5A
Rp125,000
Digunakan untuk merubah tegangan 220V AC menjadi 12V DC. Beberapa contoh barang yang menggunakan 12V DC : Lampu LED, LED Module, Strip LED, CCTV, Lampu Halogen dan sebagainya
FULL LOAD (100% Murni penggunaan Watt)
Fakta parameters :
1. Input Voltage : 170 โ 265 V AC
2. Built โ in EMI Filter
3. 100% Full-Load test, 100% burn-in tested
4. Output Voltage accurate and stable (output over voltage, over current and short circuit protection)
5. Output low ripple and noise
6. MTBF : 50,000 Hours
7. Input Frequency : 50/60 Hz
8. Input Surge : Cold start /230 V AC / 1A. Max
9. Inrush Current : 40A
10. Dimension : 110 mm (Length) x 78 mm (Width) x 35 mm (Height)
11. Cooling method : Natural Cooling air convection
12. Net weight : 350 gram
13. Ripple Noise : 100 mV
14. Efficiency : 83%
15. IP55 (Tahan terhadap Hujan). Harus diinstallasi dengan rapi.
16. 1 Year Warranty
17. Output : DC 12V / 5A / 60 Watt (MURNI)
OUTPUT SPECIFICATION :
Adjustable Voltage : +- 10%
Start up time : 1S (input 230V, Io = 100%)
Keep time : 20mS (input 230V, Io=100%)
Voltage regulation : (Full load) < 0.5%
PROTECTION FUNCTION :
Active when loading is over 110%
Output Voltage drops if overloaded
Short circuit : Hiccup mode. Recovers automatically after fault condition is removed
Overload protection : 105%- 120% rated power, automatic recovery
Over-Voltage protection : 105% โ 120% of the rated voltage
SAFETY STANDARDS :
According with EN 61347-2-13
ENVIRONMENTAL :
Working Temperature : -20 ~ 50 C / 20% ~ 90% RH (no frost)
Storage Temperature : -40 ~ 80 C / 10% ~ 95% (no frost)
Height above sea level < 2000 Meters
PERINGATAN :
1. Agar voltage output tidak turun, diusahakan pemasangan Power Supply dekat dengan sumber tenaga (listrik PLN).
2. Apabila harus jauh dari sumber tenaga,
Digunakan untuk merubah tegangan 220V AC menjadi 12V DC. Beberapa contoh barang yang menggunakan 12V DC : Lampu LED, LED Module, Strip LED, CCTV, Lampu Halogen dan sebagainya
FULL LOAD (100% Murni penggunaan Watt)
Fakta parameters :
1. Input Voltage : 170 โ 265 V AC
2. Built โ in EMI Filter
3. 100% Full-Load test, 100% burn-in tested
4. Output Voltage accurate and stable (output over voltage, over current and short circuit protection)
5. Output low ripple and noise
6. MTBF : 50,000 Hours
7. Input Frequency : 50/60 Hz
8. Input Surge : Cold start /230 V AC / 1A. Max
9. Inrush Current : 40A
10. Dimension : 110 mm (Length) x 78 mm (Width) x 35 mm (Height)
11. Cooling method : Natural Cooling air convection
12. Net weight : 350 gram
13. Ripple Noise : 100 mV
14. Efficiency : 83%
15. IP55 (Tahan terhadap Hujan). Harus diinstallasi dengan rapi.
16. 1 Year Warranty
17. Output : DC 12V / 5A / 60 Watt (MURNI)
OUTPUT SPECIFICATION :
Adjustable Voltage : +- 10%
Start up time : 1S (input 230V, Io = 100%)
Keep time : 20mS (input 230V, Io=100%)
Voltage regulation : (Full load) < 0.5%
PROTECTION FUNCTION :
Active when loading is over 110%
Output Voltage drops if overloaded
Short circuit : Hiccup mode. Recovers automatically after fault condition is removed
Overload protection : 105%- 120% rated power, automatic recovery
Over-Voltage protection : 105% โ 120% of the rated voltage
SAFETY STANDARDS :
According with EN 61347-2-13
ENVIRONMENTAL :
Working Temperature : -20 ~ 50 C / 20% ~ 90% RH (no frost)
Storage Temperature : -40 ~ 80 C / 10% ~ 95% (no frost)
Height above sea level < 2000 Meters
PERINGATAN :
1. Agar voltage output tidak turun, diusahakan pemasangan Power Supply dekat dengan sumber tenaga (listrik PLN).
2. Apabila harus jauh dari sumber tenaga,