Menampilkan semua 10 hasil

  • Technical specifications
    Displacement 31,8 cm³
    Power output 1,4/1,9 kW/bhp
    Weight 1) 4,1 kg
    Power-to-weight ratio 3 kg/kW
    Sound pressure level 2) 100 dB(A)
    Sound power level 3) 112 dB(A)
    Vibration level left/right 4) 6,6/7,8 m/s²
    Saw chain pitch 3/8″P
    STIHL Oilomatic saw chain type PMM3


  • Extech CG204: Coating Thickness Tester
    Specifications Ferrous Probe (magnetic induction) Non-Ferrous Probe (eddy current)
    Range (max res) 0 to 1250m (0.1m); 0 to 49mils (0.004mils) 0 to 1250m (0.1m); 0 to 49mils (0.004mils)
    Basic Accuracy 3% 3%
    Min. Curvature Radius 1.5mm (59.06mils) 3mm (118.1mils)
    Minimum Diameter 7mm (275.6mils) 5mm (196.9mils)
    Minimum Thickness 0.5mm (19.69mils) 0.3mm (11.81mils)
    Dimensions/Weight 4.7×2.4×1.25″ (120×6 x32mm)/ 6.17oz (175g)


  • Description
    Fiber alignment
    IPAAS, Active V-Groove Alignment

    Applicable type of fibers
    0.25mm, 0.9mm, 2.0mm, 3.0mm Indoor cable

    Fiber count
    Single fiber

    Applicable fiber dimensions
    Cladding diameter: 125μm, Coating diameter: 150μm~3mm

    Fiber setting and cleaved length
    0.20in to 0.63in

    Splicing modes
    Splice mode: 300, Heat mode: 100

    Typical splice Loss
    SM: 0.02dB, MM: 0.01dB, DS: 0.04dB, NZDS: 0.04dB

    Return loss
    > 60dB

    Splicing time
    Typical 7sec with SM

    Sleeve heating time
    Typical 13sec with IS-60 mode, IS-60 sleeve

    Applicable protection sleeve

    2.4in, 1.5in and micro sleeves

    Storage of splice result

    Data: 5,000ea up to, Image: 5,000ea up to

    Tension test

    1.96N to 2.25N

    Operating condition

    Altitude: 0~5,000m above sea level, Temperature: -14°F~122°F, Humidity: 0~95%, Wind: 15m/s, non-condensing, dust proof, water proof, shock proof

    Storage condition

    Temperature: 40°F~176°F, Humidity: 0~95%

    Dimension

    4.9(W) x 7.4(L) x 3.0(H)in (without rubber protector)

    Weight

    5.3lb (including battery)

    Viewing method and display

    2 AXIS Two CMOS cameras with 4.3-inch color LCD monitor

    Fiber view and magnification

    X/Y: 130X , Max: 260X

    Power supply

    Li-ion Battery(DC 14.8V, 3400mAh), 100 ~ 240V AC charger

    No. of splice cycles with battery

    Typical 200 cycles

    Electrode life

    38,000 splices

    Blade life

    75,000

    Terminals

    USB

    PACKAGE :
    1 Arc Fusion Splicer SWIFT KF4
    1 Battery Adapter KF-3400
    1 Instructions for use FY1701000
    1 Spare electrode EI-24
    1 Transporting Case
    1 Hard Case
    1 Cooling Tray CT-01(1.5in)
    1 Screwdriver LD-3300
    1 USB Cable
    1 Cleaver CS-01BT
    1 Manual Stripper CF-02
    1 Alcohol Dispenser PP

  • AC 20kV – 80.5kV (50Hz/60Hz)
    FRP is used for the insulating stick. It is of lightweight and has outstanding operability.
    Tip metal fitting consists of a shock-absorbing spring.
    LR44(1.5V) x 2 pcs

    Features
    ●Compact, light weight telescopic type
    When testing, the device is long and when stowing, it is very short and easy to carry.
    ●High and extra high voltage detection
    The device can detect 3kV to 250kV live circuit bare or insulated.
    ●Positive indication
    The device with flashing high luminous red LED light and intermittent distinct
    electronic buzzer sounding easy to perceive in high daylight and noisy place.
    ●Waterproof
    The sensor is enclosed tightly, preventing failure due to dirt, water and other foreign objects.
    ●Variable position
    The angle at the detector is adjustable, it can be set up so that the light emission is easy to see.


  • Key Features
    • AC only, measure up to 2000 AAC
    • -25 °C to 65 °C operating temperature range
    • Also measure resistance, continuity, AC and DC voltage

    AC Current range 42.00 to 2000 A, 3 ranges (40 Hz to 1 kHz, True RMS),
    Basic accuracy 45-66 Hz: ±1.5% rdg. ±5 dgt.
    DC Voltage range 420.0 mV to 600 V, 5 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt. (at 4.2 V range)
    AC Voltage range 4.200 V to 600 V, 4 ranges (45 to 500 Hz, True RMS),
    Basic accuracy 45-66 Hz: ±1.8% rdg. ±7 dgt. (at 4.2 V range)
    Crest factor For 2500 counts or less, 2.5 Reduces linearly to 1.5 or less at 4200 counts But, 1.5 or less for 2000 A ACA range
    Resistance range 420.0 Ω to 42.00 MΩ, 6 ranges, Basic accuracy: ±2.0 % rdg. ±4 dgt. (at 420 Ω range)
    Other functions Continuity check: Buzzer sounds at 50 Ω ±40 Ω or less, Data hold, Auto power save, Drop-proof from height of 1 meter
    Power supply Coin type lithium battery (CR2032) ×1, Continuous use 70 hours
    Core jaw diameter φ 46 mm (1.81 in), Jaw dimension: 65 mm (2.56 in) W × 13 mm (0.51 in) D
    Dimensions and mass 57 mm (2.24 in) W × 198 mm (7.80 in) H × 16 mm (0.63 in) D, 103 g (3.6 oz)
    Accessories Carrying case ×1, TEST LEAD L9208 ×1, Coin type lithium battery CR2032 (for trial purposes only) ×1, Instruction manual ×1, Download guide ×1, Operating precautions ×1


  • Streamline UPS and lead-acid battery diagnostics with measurement and recording guidance

    Key Features
    • Battery measurement can be performed while the battery is connected to its host device, without taking it offline
    • Measure and save data in as fast as 2 seconds, a 60% improvement from the legacy 3554
    • Instantaneously diagnose battery degradation (PASS, WARNING, FAIL) by measuring internal resistance and voltage*1
    • Noise reduction technology improves noise resistance
    • Screen and audio*2 guidance simplifies measurement
    • Measurement data is linked to site information and saved, reducing management man-hours
    • A variety of measurement data can be centrally managed using Hioki’s GENNECT Cross app*3
    • New protector delivers better ergonomic hold and durability in the field.

    esistance measurement range 3 mΩ (max. display 3.100 mΩ, resolution 1 μΩ) to 3 Ω (max. display 3.100 Ω, resolution 1 mΩ), 4 ranges
    Accuracy: ±0.8 % rdg ±6 dgt (3 mΩ range: ±1.0 % rdg ±8 dgt)
    Testing source frequency: 1 kHz ±30 Hz
    With function for avoiding noise frequency enabled: 1 kHz ±80 Hz
    Testing current: 160 mA (3m/30 mΩ range), 16 mA (300 mΩ range), 1.6 mA (3 Ω range)
    Open terminal Voltage: 5 V peak
    Voltage measurement range ± 6 V (max. display ±6.000 V, resolution: 1 mV) to ± 60 V (max. display ±60.00 V, resolution: 10 mV), 2 ranges, Accuracy: ±0.08 % rdg ±6 dgt
    Temperature measurement accuracy Measurement range: -10°C to 60°C (14°F to 140°F), Maximum display: 60.0°C (140.0°F), Resolution 0.1°C (0.1°F), Measurement accuracy*: ±1.0°C (±1.8°F)
    BT3554-50 standalone accuracy with simulated input: ±0.5°C (±0.9°F)
    Accessories Carrying Case C1014 ×1, Protector Z5041 ×1, Fuse Set Z5050 ×1, 0 Adj Board ×1, Neck strap ×1, USB cable ×1, Application software CD (GENNECT One) ×1, AA alkaline battery (LR6) ×8, User Manual ×1, With Pin Type Lead L2020


  • Key Features
    • Compatible with Hioki common free App GENNECT Cross (Optional Wireless Adapter Z3210 is necessary)
    • Wirelessly transfer measurement data to Excel forms for input (Will be supported by the 2021 upgrade)
    • Earth resistance measurement for multi-grounded systems
    • Measure leak current with absolute certainty with highly sensitive 0.01 mA resolution (at 20.00 mA range)
    • Measure load current up to 60.0 A range
    • Clamp at the narrowest point

    Measurement principle Instrument has two cores for voltage injection and current measurement. From the defined voltage and measured current, the total circuit loop resistance is calculated
    Note: For multi grounded systems only. In a multi-grounded system, the larger the number of grounding poles, the more accurate the measured value.
    Earthing resistance range 0.20 Ω (0.01 Ω resolution) to 1600 Ω (20 Ω resolution), 10 ranges, Zero suppression: Less than 0.02 Ω,
    Accuracy: ±1.5 % rdg. ±0.02 Ω
    AC Current range 20.00 mA (0.01 mA resolution) to 60.0 A (0.1 A resolution), 5 ranges, Zero suppression: Less than 0.05 mA,
    Accuracy: ±2.0 % rdg. ±0.05 mA (30 Hz to 400 Hz, True RMS), Crest factor 5.0 or less (for the 60 A range, 1.7 or less)
    Maximum input current (Current measurement) 100 A AC continuous, AC 200 A for 2 minutes or shorter (at 50 Hz/60 Hz, requires derating at frequency)
    Maximum rated terminal-to-ground voltage 600 VAC measurement category IV (anticipated transient overvoltage 8000 V)
    Dust-proof and waterproof IP40 (EN60529) With Jaws Closed
    Approx. 35 hours (25 Ω measurement, backlight off, with Z3210 installed and using wireless communications)
    Maximum measurable conductor diameter φ 32 mm (1.26 in)
    Dimensions and mass 73 mm (2.87 in) W × 218 mm (8.58 in) H × 43 mm (1.69 in) D, 620 g (21.9 oz)
    Accessories Carrying case, Resistance check loop (1 Ω±2%, 25Ω±1%), Strap, LR6 alkaline battery × 2, Instruction manual


  • MULTI-FUNCTION: Measures Air Velocity, Air Flow and Temperature. Temperature Range: 14~140 °F(-10~60 °C ); Air Velocity Units: M/sec, Km/H, Ft/Min, MPH, Knots; Air Flow Units: CMM, CFM.

    LARGE LCD DISPLAY: Dual Function 4-Digit LCD display, display air flow/air velocity and temperature simultaneously. Low battery indication and auto power off after 15 minutes.

    PHOTOTUBE SENSOR: Conventional angled vane arms with low-friction ball bearing, NTC-type thermistor. Use for laboratory, workshop, outdoor and garden. Sampling Rate: 1 reading per second.

    PACKAGE LIST: 1 x Anemometer, 1 x Suitcase, 1 x 9V Battery, 1 x User Manual. Dimensions of the main unit: 202*85*48 mm (7.9″x3.4″x1.9″); Weight of the main unit: 240g (8.5oz)


  • Category Description
    Fiber alignment
    IPAAS Active Cladding Alignment

    Applicable type of fibers
    0.25mm, 0.9mm, 2.0mm, 3.0mm Indoor cable

    Fiber count
    Single fiber

    Applicable fiber dimensions
    Cladding diameter: 125μm, Coating diameter: 150μm~3mm

    Fiber setting and cleaved length
    0.20in to 0.63in

    Splicing modes
    Splice mode: 300, Heat mode: 100

    Typical splice loss
    SM: 0.02dB, MM: 0.01dB, DS:0.04dB, NZDS: 0.04dB

    Return loss
    > 60dB

    Splicing time
    Typical 7 sec with SM

    Sleeve heating time
    Typical 13sec with IS-60 mode, IS-60 sleeve

    Applicable protection sleeve
    2.4in, 1.5in and micro sleeves

    Storage of splice result
    Data: 5,000ea up to, Image: 5,000ea up to

    Tension test
    1.96N to 2.25N

    Operating condition
    Altitude: 0~5,000m above sea level, Temperature: -14°F~122°F, Humidity: 0~95%, Wind: 15m/s, non-condensing, dust proof, water proof, shock proof

    Storage condition
    Temperature: 40°F~176°F, Humidity: 0~95%

    Dimension
    132(W) x 212(L) x 73(H)mm (without rubber protector)

    Weight
    1.5kg (including battery)

    Viewing method and display
    2 AXIS Two CMOS cameras with 4.3-inch color LCD monitor

    Fiber view and magnification
    X/Y: 110X , Max: 220X

    Power supply
    Li-ion Battery(DC 14.8V, 3400mAh), 100 ~ 240V AC charger

    No. of splice cycles with battery
    Typical 200 cycles

    Electrode life
    38,000 splices

    Blade Life
    75,000

    Terminals
    USB

    PACKAGE :
    1 Arc Fusion Splicer SWIFT KF4A
    1 Battery KF-3400
    1 Battery Adapter FY1701000
    1 Instructions for use
    1 Spare electrode EI-24
    1 Transporting Case HC-11(Hard Case)
    1 Optical fiber holder
    1 Cooling Tray CT-01(1.5in)
    1 Allen wrench LD-3300
    1 USB Cable
    1 Hard Brush
    1 Soft Brush
    1 Tool Box
    1 Tweezer


  • Specification
    Display: 2.4″ color display
    Resolution: 60 x 60
    Total pixel: 3600
    Field of view / shortest focal length: 20°×20°/0.5m
    Thermal sensitivity: 0.15℃
    Measurement mode: infrared focal plane measurement temperature
    Temperature range: -20℃~300℃(-4℉~572℉)
    Measurement accuracy: ±2% digital/±2℃
    Wavelength range: 8~14μm
    Image frequency: 6Hz
    Emissivity: 0.1-1.0 Adjaseble
    Focusing mode: fixed
    Palette: long knot, rainbow, black and white
    Image storage: card (4G)
    File format: BMP
    Set control: unit adjustment / language / date time
    Format / automatic shutdown
    Battery type: 4 AA alkaline battery
    Working temperature: 5℃~40℃
    Storage temperature: -20℃~50℃
    Humidity: 10%RH to 80%RH
    Vibration: 2G, IEC 60068-2-6
    Size: 230 x 80 x 52mm
    Weight: 320G